Janome JR3000 Series Operation Manual page 68

Delete Block Points
This deletes a block of points between given points in a program.
Select [Delete Block Points] from the block editing menu. The Delete Block Points confirmation screen
appears. Select [YES].
P1 P2
P1 P2
Each point that comes after the deleted points decreases by the number of points deleted.
Move Block Points
You can move a block of points between given points in a program. However, note that you cannot
move these points into other programs.
Select [Move Block Points] from the block
editing menu. The destination number entry
screen appears.
The designated block moves in front of the
destination point.
Enter the destination number.
If the F3 (TOP) key is pressed, 1 is entered as
the destination number.
If the F4 (LAST) key is pressed, the number
equal to the last point number plus 1 is entered
as the destination number.
Destination
number
P1 P2
Copy Block Points
P1 P2
Teaching Pendant Operation
P3 P4
P3 P4
Block
P5
P6
P3
P4
P3 P4
P6
P7
Delete block
P5 P6 P7
Enter a number.
Destination Number
Destination Number Entry Screen
P7
(Before moving)
P8
P5
(After moving)
P8
67
P8
(Before deletion)
P5
(After deletion)
TOP LAST
NOTE: you cannot
select a destination
number within the
block you are moving.
Desktop Robot JR3000
8