Janome JR3000 Series Operation Manual page 61

F4 (GLIST) key: ······················ This displays the program for the currently selected number as a
XY Coordinate direction
PTP Points
CP Points
NOTE
CP points (from the CP start point to the CP end point) are displayed as a single line on the graph.
Also note that dispensing specifications display only the outer circumference of an area which is
filled in. For example, if filling in a donut shaped area (an empty center), the shape is displayed not
as or , but as
The following keys are enabled on the graph display screen:
CURSOR CURSOR
CURSOR CURSOR
ENTR ···································· Displays the point settings screen (base screen) for the currently
ESC ······································ Returns to the program number entry screen.
SHIFT + CURSOR ·············· Shows the smallest/largest program.
Teaching Pendant Operation
graph. These graphs make it easy to differentiate between
individual programs.
.
······· Displays an existing program for the next largest number from the
currently displayed program. This key is disabled if there are no
programs following the current one.
······· Displays an existing program for the next smallest number from
the currently displayed program. This key is disabled if there are
no programs preceding the current one.
displayed program.
001 WORK1
Y
X
Graph Display
60 Desktop Robot JR3000