Janome JR3000 Series Operation Manual page 18

MODE ··································· Displays the mode selection menu.
SHIFT + MODE ·················· Push these keys to switch modes in the following order: Teaching
MENU ··································· Displays the Teaching Mode menu.
UTILITY ································· Displays the utility menu.
SHIFT + UTILITY ················ Displays the settings screen for the tool during teaching.
CTRL + UTILITY ················· Displays the LCD language display menu.
PRG.NO ································ Displays the program number entry screen.
SAVE ···································· Saves C & T (customizing & teaching) data.
EDIT ····································· Displays the point editing screen.
GO ······································· Moves the robot axes to the displayed coordinates.
F0 (S.MARK) ·························· Sets the current point number as the block start number when
F1 (E.MARK) ·························· Sets the current point number as the block end number when
F3 (J.EXEC) ··························· Executes the point job data for the [Point Job Number] set to a
Teaching Pendant Operation
Mode Switch Run Mode
Mode
Use this key when changing the currently selected program or
registering a new program.
Use this key to save C & T data.
Every point can be edited individually.
block editing.
block editing.
given point. Press this after aligning the cursor with the Job After
Moving.
NOTE
There are items that cannot be executed depending on the
command.
17
External Run Mode
Desktop Robot JR3000
Teaching