Janome JR3000 Series Operation Manual page 85

Example: Enter a string/expression for the outLCD, eoutLCD commands.
• outLCD 7,4,"PULSE"
Displays the string "PULSE" on the teaching pendant LCD. The outLCD command requires three
parameters (row, column, and string) for the string and its display position (column and row on the
LCD). After entering the row and the column, the displayed data entry screen appears. Enter
"PULSE". (The quotation marks (" ") which enclose the string are entered automatically.)
• eoutLCD 7,4,#sv(24) & #sv(25)
Displays the value of the combined string variables #sv(24) and #sv(25) on the teaching pendant
LCD. The eoutLCD command requires three parameters (row, column, and character string
variable) for the character string variable and string position (column and row on the LCD). After
entering the row and the column, the displayed data entry screen appears. Enter "#sv(24) &
#sv(25)".
Additionally, when entering a number as a
parameter, you can select a variable or an
expression instead of a value if "EXP" is
displayed at the bottom right of the number
entry screen (above the F4 key).
Press the F4 (EXP) key to display the
character entry screen, and enter the variable
or expression you want to set.
After entering or selecting parameter(s), the
registered command is entered for the selected
command number and the screen returns to the
point job data settings screen, shown to the
right.
If you want to enter more commands, select the
last command number (the line with a number
only; it contains no command; 003 in the
example to the right).
When you have finished entering commands,
press the ESC key on the point job data
settings screen.
Teaching Pendant Operation
Enter a number
Input Bit Number
Number Entry Screen Example
Point Job 1
001 set #genOut3
002 eoutLCD 7,4,#sv(24) & #sv(25)
003
Point Job Data Settings Screen Example
84
1
EXP
Desktop Robot JR3000