Janome JR3000 Series Operation Manual page 81

In Method 1, if you enter an additional function type number, or select a number from the list, the
settings screen of the additional function data for the entered/selected number is displayed.
In Method 2, if you press the F4 (VIEW) key on the additional function type number entry screen,
the additional function data settings screen for the currently displayed number appears.
F0 (DEL) key: ························· This displays the delete additional function data number entry
F1 (COPY) key: ······················ This displays the additional function data copy source number
F2 (NEW) key: ························ This displays the unregistered additional function number list.
F3 (LIST) key:························· This displays the registered additional function number list. Select
F4 (VIEW) key: ······················· This displays the settings screen for the currently displayed
NOTE
• Only the additional function data [Execute Condition] is created by entering commands. Methods of
inputting, editing, inserting, and deleting commands for [Execute Condition] are exactly the same
as for point job data.
• Names can be set to the additional function data [Pallet Routine] and [Workpiece Adjustment].
Press the EDIT key on the additional function data settings screen to display the name editing
screen.
• For more details on additional function data, refer to the operation manual Functions I (Point
Teaching).
Teaching Pendant Operation
screen. Enter a number to delete the additional function data for
that number.
entry screen. Enter the source number and destination number.
The contents of the source additional function data are copied to
the destination number.
Select a number from the list to display the additional function
data settings screen (with no content entered).
a number from the list to display the additional function data
settings screen for that number.
additional function data number. You can modify the data on this
screen. (This key is not available with Method 1.)
80 Desktop Robot JR3000