Janome JR3000 Series Operation Manual page 38

SHIFT + UTILITY ················ Displays the settings screen for the tool during teaching.
UTILITY ································· Displays the teaching environment settings menu.
SHIFT + F3 ························ Copies the designated point number coordinate values.
CTRL + UTILITY ················· Displays the language settings.
NOTE
• Axis movement in MDI Mode is not limited by the move area limit. If a move area limit is required,
enter the positions using JOG Mode, or otherwise be careful not to exceed the move area limit.
• If the displayed coordinate values vary from the current axis positions, the coordinate axes (X, Y, Z,
or R) which differ are highlighted.
Teaching Pendant Operation 37 Desktop Robot JR3000