Demonstration Software; Product Marking; Ordering Information; Table 1. Ordering Information - ST STM32F779I-EVAL User Manual

Demonstration software

2 Demonstration software
Demonstration software is preloaded in the STM32F779NI Flash memory. For more
information and to download the latest version, refer to the STM32F779I-EVAL
demonstration software available at the
3

Product marking

Evaluation tools marked as "ES" or "E" are not yet qualified and therefore they are not ready
to be used as reference design or in production. Any consequences deriving from such
usage will not be at ST charge. In no event, ST will be liable for any customer usage of
these engineering sample tools as reference design or in production.
"E" or "ES" marking examples of location:
•
On the targeted STM32 that is soldered on the board (for illustration of STM32 marking,
refer to the section "Package information" of the STM32 datasheet at the
website).
•
Next to the evaluation tool ordering part number, that is stuck or silkscreen printed on
the board.
4

Ordering information

To order the evaluation board refer to
8/80

Table 1. Ordering information

Order code
STM32F779I-EVAL
DocID029088 Rev 3
www.st.com website.
Table 1.
UM2036
www.st.com
Target STM32
STM32F779NI