44 Mechanical installation
Installing the drive
You can install the drive:
• With screws to a suitable surface (wall or assembly plate)
• To a DIN installation rail with the integrated lock
To install the drive with screws
1. Make marks on to the surface for the
mounting holes. Refer to
and weights
on page 100. Use the
mounting template for R3 and R4
frames.
2. Make the holes for the mounting screws.
3. Start to tighten the screws into the
mounting holes.
4. Install the drive onto the mounting
screws.
5. Tighten the mounting screws.
Dimensions
2
1
W
3
4
5