To Replace The Cooling Fan For Frame R4 - ABB ACS380 Hardware Manual

7. Free the fan clips and remove the fan
from the fan cover.
8. Install the new fan into the fan cover.
Make sure that the air flow is in the
correct direction. The air flows in from the
bottom of the drive and out from the top
of the drive.
9. Connect the fan power cable.
10. Put the fan power cable into the cable
slot in the drive.
11. Carefully put the fan cover into position in
the drive. Make sure that the fan power
cable is routed correctly.
12. Push the cover to lock into position.


To replace the cooling fan for frame R4

WARNING! Obey the instructions in
the instructions can cause physical injury or death, or damage to the
equipment.
7
10
Safety instructions
Maintenance 83
8
9
11
12
on page 13. Ignoring