To Install The Drive To A Din Installation Rail - ABB ACS380 Hardware Manual



To install the drive to a DIN installation rail

1. Move the locking part to the left.
2. Push and hold the locking button down.
3. Put the top tabs of the drive onto the top
edge of the DIN installation rail.
4. Put the drive against the bottom edge of
the DIN installation rail.
5. Release the locking button.
6. Move the locking part to the right.
7. Make sure that the drive is correctly
installed.
To remove the drive, use a flat-head
screwdriver to open the locking part.
Mechanical installation 45
1
2
3
1
2
3