110 Technical data
Brake resistor connection
Short-circuit protection
(IEC 61800-5-1,
IEC 60439-1,
UL 61800-5-1)
Efficiency
Degrees of protection
Degree of protection
(IEC/EN 60529)
Enclosure types
(UL 61800-5-1)
Overvoltage category
(IEC 60664-1)
Protective classes
(IEC/EN 61800-5-1)
The brake resistor output is conditionally short-circuit proof by
IEC/EN 61800-5-1 and UL 61800-5-1. For correct fuse selection,
contact your local ABB representative. Rated conditional short-circuit
current as defined in IEC 60439-1.
Approximately 98% at nominal power level.
IP20 (cabinet installation) / UL Open Type: Standard enclosure. The
drive must be installed in a cabinet to fulfill the requirements for
shielding from contact.
UL Open Type. For indoor use only.
III
I