Compliance With The European Machinery Directive - ABB ACS380 Hardware Manual

140 Safe torque off function
The Safe torque off function of the drive complies with these standards:
Standard
IEC 60204-1:2016
EN 60204-1:2006 +
A1:2009 + AC:2010
IEC 61000-6-7:2014
IEC/EN 61326-3-1:2017
IEC 61508-1:2010
IEC 61508-2:2010
IEC 61511-1:2016
IEC 61800-5-2:2016
EN 61800-5-2:2007
IEC 62061:2015
EN 62061:2005 +
AC:2010 + A1:2013 +
A2:2015
EN ISO 13849-1:2015
EN ISO 13849-2:2012
The function also corresponds to Prevention of unexpected start-up as specified by
EN 1037:1995 + A1:2008 and Uncontrolled stop (stop category 0) as specified in
EN 60204-1:2006 + A1:2009 + AC:2010.


Compliance with the European Machinery Directive

See section Compliance with the European Machinery Directive
Name
Safety of machinery – Electrical equipment of machines – Part 1:
General requirements
Electromagnetic compatibility (EMC) – Part 6-7: Generic standards
– Immunity requirements for equipment intended to perform
functions in a safety-related system (functional safety) in industrial
locations
Electrical equipment for measurement, control and laboratory use –
EMC requirements – Part 3-1: Immunity requirements for safety-
related systems and for equipment intended to perform safety-
related functions (functional safety) – General industrial
applications
Functional safety of electrical/electronic/programmable electronic
safety-related systems – Part 1: General requirements
Functional safety of electrical/electronic/programmable electronic
safety-related systems – Part 2: Requirements for
electrical/electronic/programmable electronic safety-related
systems
Functional safety – Safety instrumented systems for the process
industry sector
Adjustable speed electrical power drive systems –
Part 5-2: Safety requirements – Functional
Safety of machinery – Functional safety of safety-related electrical,
electronic and programmable electronic control systems
Safety of machinery – Safety-related parts of control systems –
Part 1: General principles for design
Safety of machinery – Safety-related parts of control systems – Part
2: Validation
on page 114.