Remote Live View Window - EverFocus VANGUARD 4x2H User Manual

5.2 Remote Live View Window

1
10
No. Name
Camera List
1
Button
Main Stream/
2 Sub Stream /
Mobile Stream
3 Live Channel
4 Live
5 Playback
6 Settings
Color / PTZ
7
Setting
2
11
Description
Click to hide or display the Camera List.
Click to switch all the live streams to Main Stream, Sub Stream, or Mobile
Stream (Mobile Stream is only available for IP cameras). If you want to set
up some streams for Main or some streams for Sub or Mobile, on the
Camera List, you can click the Stream icon of the specific channels and
then select Main Stream, Sub Stream or Mobile Stream. To configure
Main Stream parameters, refer to 5.4.2.1.1 Main Stream. To configure
Sub Stream parameters, refer to 5.4.2.1.2 Sub Stream. To configure
Mobile Stream parameters, refer to 5.4.2.1.3 Mobile Stream.
You can perform the following functions on each channel:
a. Double-click on a channel can display the channel in full screen. To
exit the full screen mode, double-click on the channel again.
b. You can drag and drop a channel to the desired position on the layout.
Click and hold on a channel, a Drag Channel icon will display. Drag and
drop the channel to the desired position on the layout.
Click to display the Live View window.
Click to enter the Playback page. Please refer to 5.3 Playback.
Click to enter the Settings page. Please refer to 5.4 Remote Settings.
Click to display or hide the Color / PTZ Setting Panel on the right-side of
the Live View window. Please refer to 5.2.3 PTZ Setting Panel and 5.2.4
Color Panel for more details.
H.265 VANGUARD 4x2H / 8x4H / 16x8H
3 4 5
143
6 7 8
9
7