Table of Contents
Advertisement
1.5
ORDER INFORMATION
The following table shows the available order options and part numbers required for ordering Vanguard 3000 modems.
Table 2Vanguard 3000 Order Information
Application
Fixed
(standard)
Mobile
(GPS + WiFi)
1.5.1 MOUNTING BRACKETS
A mounting bracket is provided with each Vanguard 3000. The type of bracket provided is determined by the typical
mounting method for each application.
• For fixed-location applications, a flat-plate bracket provides for low-profile, space-saving bottom mounting.
• For mobile applications, a U-shaped bracket is provided to allow for top- or bottom-mounting flexibility.
Table 3 Vanguard 3000 Mounting Brackets
Application
Fixed (standard)
Mobile
Four screws are provided with each bracket to fasten the bracket to the body of the Vanguard router.
• Fixed — Four #6-32 × ¼ (3/16-inch thread length) clear-zinc plated stainless steel Philips undercut flat head (82°
countersink) screws are provided to fasten the flat-plate mounting bracket to the bottom of the Vanguard chassis.
• Mobile — Four #8-32 × ½ (3/8-inch thread length) black plated stainless steel slotted hex flange head cap screws
are provided to fasten the U-bracket at the sides of the Vanguard chassis for top- or bottom-mounting.
Router
Bracket
Vanguard 3000 Series Multicarrier Cellular Data Modem & IP Router PN 001-7300-100 Rev. B
Model Part
Number
140-7230-000
140-7230-110
Part Number /
Description
817-7010-500
Flat plate
(fastens to the
bottom of the
Vanguard chassis)
817-2225-900
U-bracket
(fastens to the sides
of Vanguard chassis
for top or bottom
mounting)
| Page 4
Advertisement
Table of Contents
