HP 54501A Programming Reference Manual page 8

Chapter
10 lists the
Channel
Subsystem Commands
which control
all Y-axis oscilloscope functions.
Chapter
11 lists
the
Display Subsystem Commands which control
how waveforms, voltage and time markers, graticule, and text are
displayed
and written on the screen.
Chapter
12 lists
the Function
Subsystem Commands which control
the waveform math functions of the oscilloscope.
Chapter
13 lists
the Hardcopy Subsystem Commands which
control the parameters
used
during the printing
of
waveforms.
Chapter
14 lists the Measure Subsystem Commands which
select
the automatic measurements to be made.
Chapter
15 lists the Timebase Subsystem Commands which
control all X-axis oscilloscope
functions.
Chapter
16 lists
the Trigger
Subsystem
Commands
which
control
the trigger
modes and parameters for
each trigger
mode.
Chapter
17
lists
the
Waveform Subsystem Commands which
provide
access
to waveform data, including active data from
channels and functions
as
well
as
static data from waveform
memories.
Appendix
A provides details on how automatic measurements are
calculated and
offers some
tips on how to improve
results.
Appendix
B
contains example programs
using the command set
from
the
HP
54501A.
At
the end of the manual
is
Quick
Reference
Guide that
lists
the
commands and queries with their corresponding arguments and
returned formats. Also,
at the
end of the manual
is
a
complete index
for
easy reference
of
commands and functions.
Introduction-2
HP 54501A
Programming