DELay:SLOPe
DELay:SLOPe
command/query
The
:TRIGGER:DELAY:SLOPE
command
sets
the
edge that will
be
counted by the delay command. The parameters for
this
command are
NEGATIVE
or
POSITIVE.
This command
is
valid
in the Delay
Trigger
Mode.
The
DELAY:SLOPE
query returns
the current
delay
slope.
Command
Syntax:
:TRIGger:DELay:SLOPe {POSitive
I
NEGative}
Example:
OUTPUT 707;":TRIG:DEL:SLOP
POS"
Query Syntax:
:TRIGger:DELay:SLOPe?
Returned Format:
[:TRIGger:DELay:SLOPe] {POSitive
I
NEGative}
<
NL>
Example:
DIM Tos$[50]
OUTPUT 707;"TRIGGER:DELAY:SLOP?"
ENTER
707;Tos$
PRINT Tos$
HP 54501A
Programming
Trigger Subsystem
1&-17