Complete - HP 54501A Programming Reference Manual

COMPIete
COMPIete
command/query
The :ACQUIRE:COMPLETE
command
specifies the completion criteria
for
an acquisition. The parameter determines
what percentage of the time
buckets need to be
"full"
before an acquisition
is
considered complete.
If
you are in the
NORMAL mode the instrument only needs one data bit per
time bucket for that time bucket to be considered full. In order for the
time bucket to be considered full
in the
AVERAGE
or
ENVELOPE
modes
a
specified number of
data points
(COUNT)
must be acquired.
The
range for the
COMPLETE
command
is 0 to 100
and indicates the
percentage
of time
buckets that must be
"full" before the acquisition
is
considered complete.
If
the complete value is
set to
100%,
all
time buckets
must contain data for the acquisition to be considered complete.
If
the
complete value
is set
to 0 then one acquisition cycle will take
place.
The
COMPLETE query returns the completion criteria
for the currently
selected mode.
Command Syntax:
:ACQuire:COMPIete
<comp>
Where:
Example:
Query Syntax:
Returned Format:
Example:
<comp> ::=
Oto 100 percent
OUTPUT 707;":ACQUIRE:COMPLETE 85"
:ACOuire:COMPIete?
[:ACOuire:COMPIete]
<compxNL>
Where:
<comp> ::=
Oto 100 (integer- NR1 format)
DIM Cmp$[50]
OUTPUT 707;":ACQUIRE:COMPLETE?"
ENTER
707;Cmp$
PRINT
Cmp$
Acquire Subsystem
8-4
HP 54501A
Programming