Common Commands; Ese - HP 54501A Programming Reference Manual

*ESE
*ESE
(Event Status Enable)
command/query
The *ESE
command sets
the Standard Event Status Enable Register
bits.
The Standard Event
Status Enable Register contains
a
mask value for the
bits to be enabled in the Standard Event Status Register. A
one in the
Standard Event Status
Enable Register will enable
the
corresponding bit
in the Standard Event Status
Register,
a
zero will
disable the bit.
Refer
to
table 5-1 for the information about the Standard Event
Status
Enable
Register bits, bit weights, and what each bit
masks.
The
*ESE
query
returns the current contents
of the register.
Command
Syntax:
*ESE<mask>
Where:
<
mask
> ::
=
0 to 255
Example:
OUTPUT 707;"*ESE
64"
In
this
example, the
*ESE 64 command will enable URQ
(user request)
bit
6
of
the Standard Event Status Enable Register. Therefore, when
a
front panel key
is pressed, the
ESB (event summary
bit)
in the Status Byte
Register will
also be
set.
HP 54501A
Programming
Common Commands
5-5