Averaging; Mode; Envelope; Count - HP 54501A Programming Reference Manual

Averaging
Mode
The
:ACQUIRE:TYPE AVERAGE
command sets
the
HP 54501A
to the
Averaging mode.
COUNT
can be
set
in
AVERAGE
mode
by sending the
:ACQUIRE:COUNT
command followed
by
the number of
averages.
In
this mode the
value
is
rounded to
the nearest power of
2.
It
determines
the number of averages that must be acquired.
To
activate the averaging
mode from the front panel, select the
Display
menu, then select
Average. Changing the number of
averages
changes the
COUNT
value.
Envelope Mode
The
:ACQUIRE:TYPE ENVELOPE
command sets
the
HP 54501A to
the Envelope mode.
A count value can be
set
in the envelope mode. This value determines the
number of values to be used, at each
time point, when constructing
the
envelope.
The
count value cannot be set
from the front panel.
To activate the Envelope mode from
the
front panel,
select the
Display
menu,
then select the Envelope mode.
Acquire Subsystem
8-2
HP 54501A
Programming