HP 54501A Programming Reference Manual page 231

LOWer
LOWer
command/query
The
:MEASURE:LOWER
command sets
the
lower measurement
threshold. This command
sends
the value to the instrument.
The
value
that
is
sent will be in the units selected
with the
UNITS
command.
Note
The measure
UNITS
should
be set
prior to sending
this
value.
The
LOWER query returns the current setting
of the lower measurement
threshold.
Command Syntax:
:MEASure:LOWer <lowlimil_value>
Where:
< lowlimit_value >
::
=
user defined
lower threshold in
percent or
volts
Example:
OUTPUT 707;":MEASURE:LOWER
47"
Query Syntax:
:MEASure:LOWer?
Returned Format:
[:MEASure:LOWer] <lowlimit_valuexNL>
Where:
<
lowlimit_value
> ::
=
user
defined
lower
threshold in
percent or
volts
Example: DIM Lwr$[50]
OUTPUT 707;":MEAS:LOW?"
ENTER
707; Lwr$
PRINT
Lwr$
HP 54501A
Programming
Measure Subsystem
14-27