Delay - HP 54501A Programming Reference Manual

DELay
DELay
command/query
The :MEASURE:DELAY
command causes
the instrument to determine
the delay
from
the first specified edge on one source to the next specified
edge on the same source, or to
the first
specified edge on another source.
One
or
two
sources can be
specified with
the
:MEASURE:SOURCE
command.
If
user
defined
measurement specifications are selected, ensure the
defined measurement is displayed.
The
DELAY query returns the specified delay value.
Command
Syntax:
:MEASure:DELay
Example: OUTPUT
707;":MEAS:DEL"
Query
Syntax: :MEASure:DELay?
Returned Format: [:MEASure:DELay]
<delay_value>
<NL>
Where:
<delay_value > ::
=
time value
in
seconds (exponential
-
NR3 format)
Example: DIM Diy$[50]
OUTPUT 707;":MEAS:DELAY?"
ENTER 707; Dly$
PRINT Dly$
HP 54501A
Programming
Measure Subsystem
14-17