Lrn - HP 54501A Programming Reference Manual

*LRN
*LRN
(Learn)
query
The
*LRN
query returns
a program message
that contains the current
state
of the instrument.
This command
allows you to store an instrument setup in the controller.
The
stored setup can then be returned to the instrument when you want
that setup at
a
later time.
This command performs the same function
as
the
:SYSTEM:SETUP?
query.
The data
can
be
sent
to the instrument using the
:SYSTEM:SETUP
command.
Note
The returned header for
the
*LRN
query is :SYSTEM:SETUP.
The
:SYSTEM:HEADER
command does
NOT effect
this
returned header.
Query Syntax: *LRN?
Returned Format:
:SYSTem:SETup
<setup>
<NL>
Where:
<
setup
> ::=
#800001024
<
learn string
>
<NL>
The learn
string is
1024
data
bytes in length.
Example:
DIM Lrn$[20001
OUTPUT 707-,-LRN?"
ENTER 707 USING
"-K";Un$
HP 54501A
Programming
Common Commands
5-11