Hardcopy Subsystem; Introduction - HP 54501A Programming Reference Manual

Hardcopy Subsystem
13
Introduction
The
HARDCOPY
subsystem commands set various parameters
for
printing waveforms from the
HP 54501A. Everything
on the
display
is
printed when the root
level command
PRINT
is
sent.
The portion of the
waveform to be
copied
must be
placed
on the display.
To
actually make the hardcopy print, refer to the root level command
:PRINT
for the
sequence
of bus commands
that actually get the data to
the printer.
Refer
to figure 13-1 for the syntax diagram
of the
Hardcopy
subsystem
commands.
Figure
13-1.
Hardcopy Subsystem Commands Syntax Diagram
V^
HP 54501A
Programming
Hardcopy Subsystem
13-1