Slope - HP 54501A Programming Reference Manual

SLOPe
SLOPe
command/query
The :TRIGGER:SLOPE
command specifies the slope
of
the edge for the
trigger. The
SLOPE
command
is valid in the Edge
Trigger Mode, State
Trigger Mode,
and
Delay Trigger Mode when
EDGE
or
STATE
is
selected
as
the qualifier.
The SLOPE
query returns the current slope for the currently selected
trigger mode.
Command
Syntax: :TRlGger:SLOPe {NEGative I
POSitive}
Example:
OUTPUT 707;":TRIGGER:SLOPE POSITIVE"
Query
Syntax:
:TRlGger:SLOPe?
Returned Format: [:TRlGger:SLOPe] {POSitive I
NEGative} <NL>
Example:
DIM Ts$[50]
OUTPUT
707;":TR1G:SLOP?"
ENTER 707;Ts$
PRINT Ts$
Trigger Subsystem
16-32
HP 54501A
Programming