Softkeys - Cisco 7905G Administrator's Manual

Softkeys

Table A-1 Call Preference Menu Parameters (continued)
Parameter Description
Call Forward Specifies a phone number to which all calls
Number to the phone are forwarded. If a number is
entered, the Call Forward All feature is
activated.
Forward to Specifies the number of seconds after which
VMail an incoming ringing call will be forwarded
Delay(s) to the number specified by the Voice Mail
Number parameter.
Softkeys
Cisco IP Phone Models 7905G and 7912G Administrator Guide (SIP)
A-6
Appendix A Additional End User Features on the Cisco IP Phone Models 7905G and 7912G
Table A-2 describes the softkeys that can appear on the
Cisco IP Phone models 7905G and 7912G and that are not described in the User
Guide for the phone.
Table A-2 Sofkteys
Softkey
Back
BlndXfr
To Change
Scroll to the Call Forward Number
1.
parameter, press the Edit softkey,
and then enter a phone number.
2. Press the Accept softkey, and then
press the Save softkey.
1. Scroll to the Forward to VMail
Delay(s) parameter, press the Edit
softkey, and then enter a value.
Press the Accept softkey, and then
2.
press the Save softkey.
Description
Displays the previous menu.
Allows the blind transfer of a call when Allow Blind
Transfer is enabled in the Call Preferences menu. In a
blind transfer, you transfer a caller to another number
without talking to the party who is to receive the call or
verifying that the new party is there.
To perform a blind transfer, follow these steps:
During a call, press the More soft key, then press
1.
the BlndXfr soft key. The call goes on hold.
Dial the number to which to transfer the call. The
2.
phone hangs up automatically.
OL-4277-01