Cisco 7905G Administrator's Manual page 71

Chapter 4 Basic and Additional SIP Services
To configure a Cisco IP Phone for calls that do not use a SIP proxy, set the
following parameters to the values shown:
Parameter on SIP
Configuration Menu
SIP Proxy
User ID
Register with Proxy
To place an IP call, dial the telephone number and the IP address of the remote
user agent using this format:
phone_number**IPaddress
Use the star (*) key on the telephone keypad to represent the dot (.) in an IP
address. If you are using on-hook dialing, press the Dial softkey to terminate the
dial string and place the call. If you are using off-hook dialing, press the pound
(#) key on the telephone keypad to terminate the dial string and place the call
URL dialing is not supported.
Note
For example, to place a call to a user agent with an ID of 408-555-1212 at IP
address 192.168.1.100, enter the following string on your telephone keypad:
4085551212**192*168*1*100
Related Topics
•
•
•
•
OL-4277-01
Chapter 5, "Configuring the Cisco IP Phone Models 7905G and 7912G Using
the Phone Menus,"
Chapter 6, "Configuring the Cisco IP Phone Models 7905G and 7912G Using
a TFTP Server,"
Chapter 7, "Configuring the Cisco IP Phone Models 7905G and 7912G
Using Web Pages."
Chapter 8, "Profile and Web Page Parameters and Defaults."
Cisco IP Phone Models 7905G and 7912G Administrator Guide (SIP)
Parameter in Profile
or on Web Page
Proxy
UID
SipRegOn
Additional SIP Services
Setting
0 (zero) or No
Telephone number of the
phone
0 (zero) or No (disables SIP
registration with a SIP proxy
server)
4-11