Cisco 7905G Administrator's Manual page 153

Chapter 8 Profile and Web Page Parameters and Defaults
Table 8-8
Component
Sequential
NumOfFreqs
TFreq_1
TAmplitude_1
TFreq_2
TAmplitude_2
TFreq_3
TAmplitude_3
NumOfOnOffPairs
OnTime_1
OffTime_1
OnTime_2
OffTime_2
OnTime_3
OffTime_3
NumOfRepeats
TotalToneTime
OL-4277-01
Reorder Tone Parameter Example 2 Explanation
Setting
0
1
31164
1620
0
0
0
0
2
800
7200
2400
5600
0
0
5
0
Cisco IP Phone Models 7905G and 7912G Administrator Guide (SIP)
Explanation
Required setting for a tone with one frequency
One frequency in the tone
First frequency is 400 Hz
First frequency volume is –19 dBm
No second frequency
No second frequency
No third frequency
No third frequency
Two on-off pairs in the cadence of the tone
Sound in first on-off pair plays for 0.1 second
Sound in first on-off pair is followed by 0.9
second of silence
Sound in second on-off pair plays for 0.3
seconds
Sound in second on-off pair is followed by 0.7
second of silence
No third on-off pair in the cadence
No third on-off pair in the cadence
First on-off pair of the cadence plays six times
(plays once and then repeats five times), then
the second on-off pair plays
Tone plays continuously (set of two on-off
pairs of the cadence repeat continuously) until
another call event stops the tone
Parameter Details
8-35