Cisco 7905G Administrator's Manual page 158

Parameter Details
•
•
Dial Plan Rules Example 1
The following two sets of dial plan rules are translated as described in
".t7>#......t4-|911|1t7>#..........t1-|0t4>#.t7-"
".t7>#r6t4-|911|1t7>#.r9t1-|0t4>#.t7-"
Table 8-11
String
.t7>#......t4-
911
1t7>#..........t1-
0t4>#.t7-"
Dial Plan Rules Example 2
The following set of dial plan rules is translated as described in
"911|1>#.r9t3.t5-|0t411t9-"
Cisco IP Phone Models 7905G and 7912G Administrator Guide (SIP)
8-40
Rules are applied in the listed order. The first rule that completely matches
triggers the send.
Multiple rules are separated by a pipe (|).
Dial Plan Rules Example 1 Explanation
Effect
At least one digit needs to be entered. After that, send
after 7 seconds. The terminating # character can also be
applied after the first digit is entered. After 7 digits are
entered, the timeout changes to 4 seconds. The
* character means that more digits can be entered, as
long as the string is not terminated by timeout or #.
Send immediately.
At least one digit needs to be entered. After that, send
after 7 seconds. The terminating character # can also be
applied after the first digit is entered. After 10 digits are
entered, the timeout changes to 1 second. The
* character means that more digits can be entered, as
long as the string is not terminated by timeout or #.
After a 0, if no other digit is entered, send after
4 seconds. If another digit is entered, send after
7 seconds. Again, # is the terminating digit.
Chapter 8 Profile and Web Page Parameters and Defaults
Table 8-11:
Table 8-12:
OL-4277-01