Minimum Configuration Settings For The Cisco Ip Phone Models 7905G And 7912G; Making Settings With A Dhcp Server - Cisco 7905G Administrator's Manual

Chapter 3 Configuring the Cisco IP Phone Models 7905G and 7912G for SIP
Minimum Configuration Settings for the
Cisco IP Phone Models 7905G and 7912G

Making Settings with a DHCP Server

OL-4277-01

Minimum Configuration Settings for the Cisco IP Phone Models 7905G and 7912G

Related Topics
Default Boot Load Behavior, page 3-2
•
• Specifying a Preconfigured VLAN ID or Disabling VLAN IP Encapsulation,
page 3-4
• Minimum Configuration Settings for the Cisco IP Phone Models 7905G and
7912G, page 3-9
The Cisco IP Phone requires the following minimum settings for network
connectivity:
• IP address
Subnet mask
•
Network gateway (default router) IP address
•
These settings can be configured using any of the methods described in the
following sections:
• Making Settings with a DHCP Server, page 3-9
Making Settings Manually, page 3-10
•
Related Topics
• Default Boot Load Behavior, page 3-2
Specifying a Preconfigured VLAN ID or Disabling VLAN IP Encapsulation,
•
page 3-4
Basic Configuration Steps in a TFTP Server Environment, page 3-6
•
If your Cisco IP Phone network contains a DHCP server, the Cisco IP Phone
automatically learns its IP address, subnet mask, and network gateway from the
DHCP server when the phone starts up.
Cisco IP Phone Models 7905G and 7912G Administrator Guide (SIP)
3-9