Important Basic Sip Services; Required Parameters - Cisco 7905G Administrator's Manual

Important Basic SIP Services

Important Basic SIP Services

Required Parameters

Table 4-1 Required SIP Parameters and Defaults
Parameter
SIPRegInterval
(web page or profile)
Register Expires
(on phone menu)
MAXRedirect
(web page or profile)
SIPRegOn
(web page or profile)
Register with Proxy
(on phone menu)
Cisco IP Phone Models 7905G and 7912G Administrator Guide (SIP)
4-2
This section provides descriptions and cross references for configuring required
SIP parameters and for configuring other important basic SIP services. This
section includes these topics:
Required Parameters, page 4-2
•
Establishing Authentication, page 4-4
•
• Configuring Refresh Interval, page 4-4
Table 4-1 shows the SIP parameters that you must supply for a Cisco IP Phone.
The Parameter fields in this table show each parameter name as it appears on a
phone's web page or in its profile ("web page or profile"), or on the phone's
Network Configuration menu or SIP Configuration menu ("on phone menu").
For more detailed explanations of these parameters, see
the Cisco IP Phone Models 7905G and 7912G Using the Phone Menus,"
Chapter 8, "Profile and Web Page Parameters and Defaults."
contain information about other configuration parameters.
Description
Number of seconds between registration
renewal.
Maximum number of times to try
redirection.
Enable SIP registration.
Chapter 4 Basic and Additional SIP Services
Chapter 5, "Configuring
These chapters also
Minimum Maximum
Value Value
1 86400
0 10
0 1
and
Default
Value
3600
5
0
OL-4277-01