Cisco 7905G Administrator's Manual page 48

Installing the Cisco IP Phone Models 7905G and 7912G
Step 4 Unlock network configuration settings.
For instructions, see the
section on page
In the Network Configuration menu, use the Navigation button to select
Step 5
Alternate TFTP, and then press the Yes softkey.
In the Network Configuration menu, use the Navigation button to select TFTP
Step 6
Server, and then press the Edit softkey.
The current value for the IP address of the TFTP server appears in the Current
Value and the New Value fields.
Step 7 Enter a new IP address in the New Value field.
Use the arrow softkey (<<) to delete existing characters. Use the * key on the
keypad to enter a period (.).
Note
Step 8 Press the Validate softkey.
In the Network Configuration menu, use the Navigation button to select Profile
Step 9
Encrypt Key, and then press the Edit softkey.
Step 10 Enter the encryption key using the keys on the keypad, and then press the
Validate softkey.
For information about entering alpha-numeric characters, see the
Parameter Values" section on page
Step 11 Press the Save softkey.
Press the Back softkey and then press the Exit softkey.
Step 12
The phone downloads its configuration profile and the latest phone software from
the TFTP server.
Cisco IP Phone Models 7905G and 7912G Administrator Guide (SIP)
2-14
Chapter 2
"Unlocking and Locking Configuration Parameters"
5-4.
When the cursor moves over a character, the character is deleted and a
new character must be entered. You cannot cancel individual character
deletions, but you can use the Cancel softkey to back out of the screen
without saving your changes.
Installing the Cisco IP Phone Models 7905G and 7912G
5-5.
"Editing
OL-4277-01