Cisco 7905G Administrator's Manual page 152

Parameter Details
Table 8-7
Component
OffTime_2
OnTime_3
OffTime_3
NumOfRepeats
TotalToneTime
ReorderTone Parameter Example 2
Assume that you want a reorder tone in which:
•
•
•
•
•
For this reorder tone, make the following setting. See
explanation.
ReorderTone:0,1,31164,1620,0,0,0,0,2,800,7200,2400,5600,0,0,5,0
Cisco IP Phone Models 7905G and 7912G Administrator Guide (SIP)
8-34
Reorder Tone Parameter Example 1 Explanation (continued)
Setting
0
2640
8000
0
0
The only frequency is 400 Hz.
The frequency plays six times, each time for 0.1 second followed by 0.9
second of silence.
The frequency then plays once for 0.3 second followed by 0.7 second of
silence.
The volume of the frequency is –19 dBm.
The tone plays until another call event stops the tone.
Chapter 8 Profile and Web Page Parameters and Defaults
Explanation
No silence after the second sound (the third
sound plays immediately)
Sound in third on-off pair plays for 0.33
seconds
1 second of silence after the sound in the third
on-off pair (before the pattern repeats,
beginning with the first on-off pair)
First on-off pair of the cadence plays once
(does not repeat), then the second on-off pair
plays
Tone plays continuously (set of three on-off
pairs of the cadence repeat continuously) until
another call event stops the tone
Table 8-8 for a detailed
OL-4277-01