Chapter 8
Profile and Web Page Parameters and Defaults
Table 8-3
Call Preference Parameters (continued)
Parameter
GUI Show Mask
(on web page)
CallPrefGuiShow
(in profile)
OL-4277-01
Description
Specifies which parameters, if any, appear on the Call Preferences menu on the
phone.
Set a bit to 0 if the corresponding parameter should not appear. Set the bit to 1
if the parameter should appear.
Bit 0: Do Not Disturb.
•
•
Bit 1: Allow Call Waiting.
•
Bit 2: Block Caller ID.
Bit 3: Call Forward Number.
•
•
Bits 4–5: Reserved.
Bit 6: Display Name.
•
Bit 7: Time Format.
•
•
Bit 8: Date Format.
Bit 9: Voice Mail Number.
•
•
Bit 10: Allow Call Transfer.
Bit 11: Allow Attended Transfer.
•
Bit 12: Allow Conference.
•
•
Bit 13: Short Name.
Bits 14–23: Reserved.
•
Bit 24: Block Anonymous Call.
•
•
Bit 25: Reserved.
Bit 26: Forward to Voice Mail Delay.
•
•
Bit 27 and bits 29–31: Reserved.
In addition, bit 28, if set to 1, causes a registration status icon to appear on the
phone's LCD screen. This icon indicates whether the phone is registered to the
SIP proxy server.
Value type: Bitmap.
Default value: 0xFFFFFFFF
Cisco IP Phone Models 7905G and 7912G Administrator Guide (SIP)
Call Preference Parameters
8-19