Refreshing Or Resetting The Cisco Ip Phone; Refreshing The Cisco Ip Phone; Resetting The Cisco Ip Phone - Cisco 7905G Administrator's Manual

Chapter 6 Configuring the Cisco IP Phone Models 7905G and 7912G Using a TFTP Server

Refreshing or Resetting the Cisco IP Phone

Note

Refreshing the Cisco IP Phone

Resetting the Cisco IP Phone

OL-4277-01
When you make configuration changes to a Cisco IP Phone profile, you can
refresh or reset the Cisco IP Phone for these configuration changes to
immediately take effect. If you do not refresh or reset the phone, the configuration
changes will take effect the next time the phone contacts the TFTP server, which
occurs based on the configured value of the CfgInterval parameter.
A refresh procedure will update a phone with the current profile. A reset
procedure will update a phone with the current profile and will power-down and
power-up the phone. A reset is not necessary if your only goal is to update a
phone's profile.
You use bits 8 and 0 of the OpFlags parameter prevent end users from refreshing
or resetting a phone. See the
information.
This section includes the following topics:
• Refreshing the Cisco IP Phone, page 6-17
• Resetting the Cisco IP Phone, page 6-17
To refresh the Cisco IP Phone, enter the following command from your web
browser:
http://<ipaddress>/refresh
where ipaddress is the IP address of the Cisco IP Phone that you are refreshing.
To reset the Cisco IP Phone, enter the following command from your web
browser:
http://<ipaddress>/reset
where ipaddress is the IP address of the Cisco IP Phone that you are resetting.
Cisco IP Phone Models 7905G and 7912G Administrator Guide (SIP)
Refreshing or Resetting the Cisco IP Phone
"Network Parameters" section on page 8-2 for more
6-17