Sip Configuration Menu - Cisco 7905G Administrator's Manual

SIP Configuration Menu

Table 5-1 Network Configuration Menu Parameters (continued)
Parameter Description
Profile Encrypt Specifies an encryption key used to
Key decrypt the profile that the phone
downloads from the TFTP server.
For more information about
encryption keys, see
Encryption" section on page
Erase Changes these settings to their
Configuration default values: Network
Configuration menu settings
(including password), SIP
Configuration menu settings, Call
Preferences menu settings, volume
settings, and contrast settings.
SIP Configuration Menu
Note
Cisco IP Phone Models 7905G and 7912G Administrator Guide (SIP)
5-14
Chapter 5 Configuring the Cisco IP Phone Models 7905G and 7912G Using the Phone Menus
"Using
The SIP Configuration menu lets you configure a variety of SIP signaling
parameters. Table 5-2
them.
The Edit, Yes, or No softkeys for changing SIP configuration parameters appear
only if parameters are unlocked as described in the
Configuration Parameters" section on page
you can use to edit parameters, see the
page 5-5.
To Change
Unlock configuration parameters.
1.
2. Scroll to the Profile Encryption Key
parameter, press the Edit softkey, and
then enter a new encryption key.
Press the Validate softkey, and then press
3.
6-15.
the Save softkey.
Unlock configuration parameters.
1.
Scroll to the Erase Configuration
2.
parameter, press the Yes softkey, and then
press the Save softkey.
describes these parameters and explains how to change
5-4. For information about the keys
"Editing Parameter Values" section on
"Unlocking and Locking
OL-4277-01