Feature Buttons And Softkeys - Cisco 6800 Series Administration Manual

Feature Buttons and Softkeys

Feature
Show Calling ID and Calling Number
Show Duration for Call History
Silence Incoming Call
Speed Dial
Time Zone Update
Transfer
Voice Message System
Web Access Enable by Default
XSI call logs display
Feature Buttons and Softkeys
The following table provides information about features that are available on softkeys, features that are
available on dedicated feature buttons, and features that you need to configure as programmable feature
buttons. An "X" in the table indicates that the feature is supported for the corresponding button type or softkey.
Of the two button types and softkeys, only programmable feature buttons require configuration in Cisco IP
Phone administration.
Cisco IP Phone 6800 Series Multiplatform Phones Administration Guide
156
Description and More Information
The phones can display both the calling ID and calling number for incoming calls. The
IP phone LCD display size limits the length of the calling ID and the calling number that
display.
The Show Calling ID and Calling Number feature applies to the incoming call alert only
and does not change the function of the Call Forward and Hunt Group features.
See "Caller ID" in this table.
Displays the time duration of placed and received calls in the Call History details.
If the duration is greater than or equal to one hour, the time is displayed in the Hour,
Minute, Second (HH:MM:SS) format.
If the duration is less than one hour, the time is displayed in the Minute, Second (MM:SS)
format.
If the duration is less than one minute, the time is displayed in the Second (SS) format.
Allows you to silence an incoming call by pressing Ignore softkey or by pressing the
volume button down.
Dials a specified number that has been previously stored.
Updates the Cisco IP Phone with time zone changes.
Allows users to redirect connected calls from their phones to another number.
Some JTAPI/TAPI applications are not compatible with the Join and Direct Transfer
feature implementation on the Cisco IP Phone and you may need to configure the Join
and Direct Transfer Policy to disable join and direct transfer on the same line or possibly
across lines.
Enables callers to leave messages if calls are unanswered.
Web services are enabled by default.
Allows you to configure a phone to display recent call logs from either the BroadWorks
server or the local phone. After you enable the feature, the Recents screen has a Display
recents from menu and the user can choose the XSI call logs or the local call logs.
Phone Administration