Cisco 7905G Administrator's Manual page 82

Network Configuration Menu
Table 5-1 Network Configuration Menu Parameters (continued)
Parameter Description
TFTP Server IP address or URL of the TFTP
server from which a phone obtains
a profile. Required if the DHCP
server does not provide the TFTP
server address.
If you set the Alternate TFTP
parameter to Yes, you must enter a
non-zero value for the TFTP
Server parameter.
Default Router IP address of the network gateway
used by the phone. You can use this
parameter to assign this address if
DHCP does not provide it.
If you assign a network gateway
address with this parameter, you
must also assign an IP address and
a subnet mask for the phone. See
the IP Address and the Subnet
Mask parameters in this table.
DNS Server 1, IP addresses of the Primary
DNS Server 2 Domain Name System (DNS)
server (DNS Server 1) and
secondary DNS server (DNS
Server 2) used by the phone.
Cisco IP Phone Models 7905G and 7912G Administrator Guide (SIP)
5-8
Chapter 5 Configuring the Cisco IP Phone Models 7905G and 7912G Using the Phone Menus
To Change
Unlock configuration parameters.
1.
2. Set the TFTP Enabled parameter to Yes.
Set the Alternate TFTP parameter to Yes.
3.
Scroll to the TFTP Server parameter,
4.
press the Edit softkey, and then enter a
new TFTP server IP address or URL.
5. Press the Validate softkey, and then press
the Save softkey.
1. Unlock configuration parameters.
Set the DHCP Enabled parameter to No.
2.
3. Scroll to the Default Router parameter,
press the Edit softkey, and then enter a
new network gateway IP address.
Press the Validate softkey, and then press
4.
the Save softkey.
Unlock configuration parameters.
1.
2. Set the Alternate DNS parameter to Yes.
3. Scroll to the DNS Server 1 parameter or
the DNS Server 2 parameter, press the
Edit softkey, and then enter a new DNS
server IP address.
Press the Validate softkey, and then press
4.
the Save softkey.
OL-4277-01