Ordering - GE C70 Instruction Manual

2 PRODUCT DESCRIPTION
Roles
|------------ Product Info
Maintenance
|------------ Modbus Analyzer
|------------ Change Front Panel
|------------ Update Firmware
|------------ Retrieve File
Table Notes:
1. RW = read and write access
2. R = read access
3. Supervisor = RW (default), Administrator = R (default), Administrator = RW (only if Supervisor role is disabled)
4. NA = the permission is not enforced by CyberSentry Security
CYBERSENTRY SERVER AUTHENTICATION
The UR has been designed to automatically direct authentication requests based on user names. In this respect, local
account names on the UR are considered as reserved, and not used on a RADIUS server.
The UR automatically detects whether an authentication request is to be handled remotely or locally. As there are only five
local accounts possible on the UR, if the user ID credential does not match one of the five local accounts, the UR automat-
ically forwards the request to a RADIUS server when one is provided.
If a RADIUS server is provided, but is unreachable over the network, server authentication requests are denied. In this situ-
ation, use local UR accounts to gain access to the UR system.
a) OVERVIEW
The C70 is available as a 19-inch rack horizontal mount and consists of the following modules: power supply, CPU, CT/VT,
digital input and output, transducer input and output, and inter-relay communications. Each of these modules can be sup-
plied in a number of configurations specified at the time of ordering. The information required to completely specify the
relay is provided in the following tables (see chapter 3 for full details of relay modules).
Order codes are subject to change without notice. See the GE Multilin ordering page at
http://www.gedigitalenergy.com/multilin/order.htm
NOTE
The order code structure is dependent on the mounting option (horizontal or vertical) and the type of CT/VT modules
(enhanced diagnostic CT/VT modules or HardFiber process bus modules). The order code options are described in the fol-
lowing sub-sections.
b) ORDER CODES WITH ENHANCED CT/VT MODULES
The order codes for the horizontal mount units are shown below.
Table 2–4: C70 ORDER CODES (HORIZONTAL UNITS)
C70 - * ** - * * * - F
BASE UNIT C70 | | | | |
CPU T | | | |
U | | | |
V | | | |
SOFTWARE 00 | | |
03 | | |
12 | | |
13 | | |
A0 | | |
A3 | | |
AC | | |
AD | | |
B0 | | |
B3 | | |
BC | | |
BD | | |
C0 | | |
C3 | | |
CC | | |
CD | | |
D0 | | |
D3 | | |
DC | | |
DD | | |
E0 | | |
E3 | | |
GE Multilin
Administrator
R
RW
NA
RW
Yes
Yes
for the latest C70 ordering options.
** - H ** - M ** - P ** - U ** - W/X
| | | | |
| | | | |
| | | | |
| | | | |
| | | | |
| | | | |
| | | | |
| | | | |
| | | | |
| | | | |
| | | | |
| | | | |
| | | | |
| | | | |
| | | | |
| | | | |
| | | | |
| | | | |
| | | | |
| | | | |
| | | | |
| | | | |
| | | | |
| | | | |
| | | | |
| | | | |
C70 Capacitor Bank Protection and Control System
Engineer Operator Supervisor
R R
RW R
NA NA
RW RW
No No
No No
** Full Size Horizontal Mount
| Base Unit
| RS485 with 3 100Base-FX Ethernet, multimode, SFP with LC
| RS485 with 1 100Base-T Ethernet, SFP RJ-45 + 2 100Base-FX Ethernet, multimode, SFP with LC
| RS485 with 3 100Base-T Ethernet, SFP with RJ-45
| No software options
| IEC 61850
| Enhanced capacitor bank control (time and date, capacitor control supervision, automatic voltage regulator)
| Enhanced capacitor bank control and IEC 61850
| CyberSentry Lvl 1
| CyberSentry Lvl 1 and IEC 61850
| CyberSentry Lvl 1 and enhanced capacitor bank control
| CyberSentry Lvl 1, IEC 61850, and enhanced capacitor bank control
| IEEE 1588
| IEEE 1588 and IEC 61850
| IEEE 1588 and enhanced capacitor bank control
| IEEE 1588, IEC 61850, and enhanced capacitor bank control
| Parallel Redundancy Protocol (PRP)
| PRP and IEC 61850
| PRP and Enhanced Capacitor Bank Control
| PRP, IEC 61850, and Enhanced Capacitor Bank Control
| IEEE 1588 and CyberSentry Lvl 1
| IEEE 1588, CyberSentry Lvl 1, and IEC 61850
| IEEE 1588, CyberSentry Lvl 1, and enhanced capacitor bank control
| IEEE 1588, CyberSentry Lvl 1, IEC 61850, and enhanced capacitor bank control
| IEEE 1588 and PRP
| IEEE 1588, PRP, and IEC 61850
2.1 INTRODUCTION
Observer
R R
R R
NA NA
R R
No No
2
No No

2.1.3 ORDERING

2-7