Sources - GE C70 Instruction Manual

6.3 METERING
a) MAIN MENU
PATH: ACTUAL VALUES
 SOURCE SRC 1

This menu displays the metered values available for each source.
Metered values presented for each source depend on the phase and auxiliary VTs and phase and ground CTs assignments
for this particular source. For example, if no phase VT is assigned to this source, then any voltage, energy, and power val-
ues will be unavailable.
6
b) PHASE CURRENT METERING
PATH: ACTUAL VALUES
 PHASE CURRENT
 SRC 1
6-14
 
METERING SOURCE SRC1
 PHASE CURRENT
 SRC 1
 GROUND CURRENT
MESSAGE
 SRC 1
 PHASE VOLTAGE
MESSAGE
 SRC 1
 AUXILIARY VOLTAGE
MESSAGE
 SRC 1
 POWER
MESSAGE
 SRC 1
 FREQUENCY
MESSAGE
 SRC 1
 CURRENT HARMONICS
MESSAGE
 SRC 1
 VOLTAGE HARMONICS
MESSAGE
 SRC 1
 
METERING SOURCE SRC 1
SRC 1 RMS Ia: 0.000
b: 0.000 c: 0.000
SRC 1 RMS Ia:
MESSAGE
0.000
SRC 1 RMS Ib:
MESSAGE
0.000
SRC 1 RMS Ic:
MESSAGE
0.000
SRC 1 RMS In:
MESSAGE
0.000
SRC 1 PHASOR Ia:
MESSAGE
0.000
SRC 1 PHASOR Ib:
MESSAGE
0.000
SRC 1 PHASOR Ic:
MESSAGE
0.000
SRC 1 PHASOR In:
MESSAGE
0.000
C70 Capacitor Bank Protection and Control System
See page 6–14.
See page 6–15.
See page 6–15.
See page 6–16.
See page 6–16.
See page 6–17.
See page 6–17.
See page 6–18.

PHASE CURRENT
A
A
A
A
A
A 0.0°
A 0.0°
A 0.0°
A 0.0°
6 ACTUAL VALUES

6.3.2 SOURCES

GE Multilin