Configuring The C70 For Software Access - GE C70 Instruction Manual
Capacitor bank protection and control system
Hide thumbs
Also See for C70:
- Instruction manual (708 pages) ,
- Communications manual (532 pages) ,
- Communications manual (526 pages)
Table of Contents
Advertisement
1 GETTING STARTED
tion, then click the Add Now button to list software items for the product. EnerVista Launchpad then obtains the
software from the Internet or DVD and automatically starts the installation program.
6.
Select the complete path, including the new directory name, where the EnerVista UR Setup is to be installed.
7.
Click the Next button to begin the installation. The files are installed in the directory indicated, and the installation pro-
gram automatically creates icons and adds EnerVista UR Setup to the Windows start menu.
8.
Click Finish to complete the installation. The UR device is added to the list of installed intelligent electronic devices
(IEDs) in the EnerVista Launchpad window, as shown.
a) OVERVIEW
You connect remotely to the C70 through the rear RS485 or Ethernet port with a computer running the EnerVista UR Setup
software. The C70 can also be accessed locally with a laptop computer through the front panel RS232 port or the rear
Ethernet port using the Quick Connect feature.
•
To configure the C70 for remote access via the rear RS485 port, see the Configuring Serial Communications section.
•
To configure the C70 for remote access via the rear Ethernet port, see the Configuring Ethernet Communications sec-
tion. An Ethernet module must be specified at the time of ordering.
•
To configure the C70 for local access with a laptop through either the front RS232 port or rear Ethernet port, see the
Using the Quick Connect Feature section.
GE Multilin
Figure 1–5: IDENTIFYING THE UR DEVICE TYPE
Figure 1–6: UR DEVICE ADDED TO LAUNCHPAD WINDOW
C70 Capacitor Bank Protection and Control System
1.3 ENERVISTA UR SETUP SOFTWARE
1.3.3 CONFIGURING THE C70 FOR SOFTWARE ACCESS
1
1-7
Advertisement
Table of Contents
