GE C70 Instruction Manual page 659

APPENDIX G
Table G–6: MAJOR UPDATES FOR C70 MANUAL REVISION Y1 (Sheet 2 of 2)
PAGE PAGE CHANGE
(X2) (Y1)
5- 5- Update
5-36 5- Delete
5- 5-43 Add
5- 5-52 Add
5- 5- Add
5- 5-112 Update
5-146 5-150 Update
5-223 5-223 Delete
5- 5-238 Add
6-1 6-1 Update
6- 6-7 Add
6-9 6-9 Delete
6- 6-10 Add
7- 7-1 Add
7- 7-3 Add
7- 7- Add
7- 7- Add
8- 8-4 Add
A- A- Add
B-8 B-8 Update
C-23 C-23 Update
GE Multilin
DESCRIPTION
Updated Communication to Real Time Clock in SNTP protocol settings path. Moved SNTP
Protocol menu and settings descriptions to Real Time Clock subsection
Deleted section k) SNTP Protocol and the settings descriptions
Added new section for Local Time menu settings and settings description
Added new PTP Fail menu item to the User-Programmable Self Tests menu
Added PTP Failure and CLOCK UNSYNCHRONIZED to FlexLogic Operands table
Added row for DeltaTime to Table 5-: FlexElement Base Units
Updated Figure 5-64 Neutral Current Unbalance Scheme Logic (went from A2 to A1_2 file)
Deleted section 5.8.5c Remote Devices: ID of Device for Receiving GSSE/GOOSE Messages,
meaning the Settings > Input/Outputs > Remote Devices settings
Added new CyberSentry security section and main menu, local passwords, session settings,
restore defaults, and supervisory subsections to Chapter 5
Update Actual Values main menu to include Real Time Clock Synchronization submenu
Added new section for Real Time Clock synchronizing consisting of the menu of settings and the
setting descriptions
Deleted section 6.2.17 Ethernet Switch
Added new section 6.2.18 Remaining Connection Status
Added Security command to the Commands main menu
Added Reboot Relay command and description to the Relay Maintenance menu items
Added Security menu and submenu commands and descriptions to the Command menu
Added to Minor self-test error message **Bad PTP Signal**
Added new section for CyberSentry software option with overview and security menu subsections
Added FlexAnalog item PTP–IRIG-B Delta to Table A-1: FlexAnalog Data Items
Updated Modbus memory map table to include port 0 for Modbus slave address, TCP, DNP,
HTTP, TFTP, MMS, and removed references to COM 1 RS485 port
Updated tables in sections C.6.3 ACSI Services Conformance Statement and C.7.1 Logical
Nodes Table
C70 Capacitor Bank Protection and Control System
G.1 CHANGE NOTES
G
G-3