Ordering - GE D60 Instruction Manual

2 PRODUCT DESCRIPTION
Roles
|------------ Front Panel Labels Designer
|------------ Protection Summary
Commands
|------------ Virtual Inputs
|------------ Clear Records
|------------ Set date and time
User Displays
Targets
Actual Values
|------------ Front Panel Labels Designer
|------------ Status
|------------ Metereing
|------------ Transducer I/O
|------------ Records
|------------ Product Info
Maintenance
|------------ Modbus Analyzer
|------------ Change Front Panel
|------------ Update Firmware
|------------ Retrieve File
Table Notes:
1. RW = read and write access
2. R = read access
3. Supervisor = RW (default), Administrator = R (default), Administrator = RW (only if Supervisor role is disabled)
4. NA = the permission is not enforced by CyberSentry Security
CYBERSENTRY SERVER AUTHENTICATION
The UR has been designed to automatically direct authentication requests based on user names. In this respect, local
account names on the UR are considered as reserved, and not used on a RADIUS server.
The UR automatically detects whether an authentication request is to be handled remotely or locally. As there are only five
local accounts possible on the UR, if the user ID credential does not match one of the five local accounts, the UR automat-
ically forwards the request to a RADIUS server when one is provided.
If a RADIUS server is provided, but is unreachable over the network, server authentication requests are denied. In this situ-
ation, use local UR accounts to gain access to the UR system.
a) OVERVIEW
The D60 is available as a 19-inch rack horizontal mount or reduced-size (¾) vertical unit and consists of the following mod-
ules: power supply, CPU, CT/VT, digital input and output, transducer input and output, and inter-relay communications.
Each of these modules can be supplied in a number of configurations specified at the time of ordering. The information
required to completely specify the relay is provided in the following tables (see chapter 3 for full details of relay modules).
Order codes are subject to change without notice. See the ordering page at
http://www.gedigitalenergy.com/multilin/order.htm
NOTE
The order code structure is dependent on the mounting option (horizontal or vertical) and the type of CT/VT modules
(enhanced diagnostic CT/VT modules or HardFiber
following sub-sections.
GE Multilin
Administrator Engineer
NA NA
NA NA
RW RW
RW RW
RW RW
RW RW
R
R
R
R
R
R
R
R
R
RW RW
NA NA
RW RW
Yes No
Yes No
for the latest options.
TM
process bus modules). The order code options are described in the
D60 Line Distance Protection System
2.1 INTRODUCTION
Operator Supervisor
NA NA
NA NA
RW R
RW R
RW R
RW R
R R R
R R R
R R R
R R R
R R R
R R R
R R R
R R R
R R R
R R
NA NA
RW R
No No
No No
Observer
NA
NA
R
R
R
2
R
R
R
R
R
R
R
R
R
R
R
NA
R
No
No

2.1.3 ORDERING

2-7