Factory Five Racing '33 Hot Rod Assembly Manual page 621

It is helpful to have a friend or two when mounting the painted body. One person on each side pulling out
slightly and one in the rear is the easiest way to do this. Also make sure that the exhaust tip is not installed
as it protrudes though the body. You can leave the door hinge standoffs on the frame just be very careful
with the body when pulling it out to go over them one at a time.
When attaching the body, if running A/C, attach the vent hoses to the ducts and zip tie before the body is
set in place.
If running A/C, make sure that the hoses do not get crushed when putting the body on.
620
www.factoryfive.com 508-291-3443