Wheels; Go-Cart The Chassis; Front Suspension - Factory Five Racing '33 Hot Rod Assembly Manual

Adjust the length of the shoulder straps to fit.
Fasten the belts with the ½" fasteners to the bottom of the plate.
Install lap portion of the harnesses to the mounts on the chassis with the supplied hardware. It is a good
idea to mount the belt on the outside of the tabs to provide the most amount of space for the seat.

Wheels

 See the Appendix for wheel/tire specs.
Install and torque your wheels. Make sure they rotate freely and do not interfere with the brake calipers,
lines, or any suspension components.
Lower the car off the jack stands and onto the ground.

Go-cart the Chassis

 check the car using the suggested "Final check" sheet in the appendix

Front Suspension


See the Appendix for alignment and ride height
Set the ride height of the frame.
Align the front suspension if driving the chassis.
349
www.factoryfive.com 508-291-3443