Table of Contents
Advertisement
Jack the spindle up so the body end of the shocks can be mounted on the shock mount on the control arm
using the longer 1.09" spacer on the back and
Torque the lower shock bolt to 54Nm (40 ft-lb).
Remove the floor jack.
Driveshaft adapter
There are two different Driveshaft adapters, one for center sections from automatic cars which is
coated clear zinc. The Driveshaft adapter for center sections from manual cars is coated yellow
zinc.
Driveshaft adapter, fasteners
8mm hex socket, torque wrench, Loctite.
Apply the emergency brake.
" spacer in front of the shock.
7
/
16
102
www.factoryfive.com
508-291-3443
Advertisement
Table of Contents
