Factory Five Racing '33 Hot Rod Assembly Manual page 288

Clamp the exhaust mounts to the frame to hold the assembly in place.
Attach the tip section of the tail pipe to the muffler.
The mount tabs for the exhaust mounts have the ability to slide on the rubber bushing. Position the mount
tabs so that they overhang the frame rails. Mark the location of the frame on the mount tab so that you can
bend it up at a 90˚ angle to mount to the frame so that the bolt holding it to the frame is in sheer if
possible.
287
www.factoryfive.com 508-291-3443