Table of Contents
Advertisement
have to thread each wire through the nut and have to realign the headlight each time a good idea is to
make a spacer to go on the radiator mount and cut the side covers to go around the spacer so headlight
removal is not necessary.
Hood cable release
",
",
3
3
11
Drill,
/
/
32
16
marker, scissors.
Hood hinge components, insulated line clips, secondary body fasteners.
" hole in the firewall just inside the side 1.50" tube and below the 1.50" tube going across the
3
Drill a
/
16
car foot box up near the round 1.50" tube for the hood release cable.
" drill bits, drill, rivet tool, air saw or jig saw, Philips screwdriver,
/
32
www.factoryfive.com
484
508-291-3443
Advertisement
Table of Contents
