Factory Five Racing '33 Hot Rod Assembly Manual page 36

the rear springs are 250#. Other springs are available for different ride characteristics.
 WARNING! Incorrect assembly and maintenance of this part can cause serious injury or death.
 The front shocks extended measurement is 15.15" center to center. They are 2.50" shorter than t h e
rear shocks
 If using the silver double adjustable shocks, these must be mounted with the body of the shock down.
Unpack the front shocks, coil-over's and hardware.
Double check the jam nut under the rod end and bump stop to make sure that it is tight.
Screw the spring seat down on the sleeve so it is closer to the unthreaded end.
Slide the coil sleeve over the body of the damper beginning at the end which has the rubber bump stop.
The unthreaded end of the sleeve goes first so that it will sit on the snap ring on the shock body.
35
www.factoryfive.com 508-291-3443