Door Frame Prep For Power Windows - Factory Five Racing '33 Hot Rod Assembly Manual

" drill bit in opposite corners of the marked areas then cut the rectangles out.
5
Use a /
16

Door frame prep for power windows

 If you plan to use a Hard top with the power windows, now is the best time to prepare the door frames
for the window track mounts so that the frames will not need removing later.
 The pictures shown show an older motor mount bracket that is not on current frames.
Use the hole dimensions from the diagram on the next page to mark the mounting bracket bolt holes.
395
www.factoryfive.com 508-291-3443