Fuel Tank - Factory Five Racing '33 Hot Rod Assembly Manual

Fuel Tank


Fuel line components, Fuel tank components, Insulated clip hardware

" wrench, " Hex key, ⅜" drill bit, drill, rivet tool, silicone gun
9 5
/ /
16 16
Install the front aluminum floor that goes under the front of the fuel tank.
Place the fuel tank onto the frame. The angled face of the tanks sits right behind the roll bars. When
installing the tank move it past the side of the frame rails to load it into place as seen in the above picture.
252
www.factoryfive.com 508-291-3443